Choose your exact model and configuration for connection steps, controls and software requirements. Pro, Max, V2 and HE editions may use different instructions. Use View product below the keyboard image to check the configuration you want.
Connection, software and daily controls by model.
Mechanical
F75
SKU: A10057
Keys
80 keys + 1 knob button
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
322.7 × 143.2 × 43.1 mm (±1 mm)
Battery
4000mAh
Check switch and color choices for the selected configuration.
Selected product image; colors and configurations vary.View product
Appearance and layout
Compact rectangular body with top-facing letter legends, dedicated F-row, arrows and top-right knob; no separate number pad.
USB wired
Connect a USB data cable to the keyboard and computer, then select the center USB/wired position on the mode switch. The center position turns battery power off when the USB cable is disconnected.
2.4GHz receiver
Select 2.4GHz mode and plug in the included receiver; it is factory-paired. If reconnection fails, remove the receiver, hold Fn + `~ for about 3 seconds until the indicator flashes rapidly, then insert the receiver again.
Bluetooth channels
Select Bluetooth mode. Use Fn + 1 / 2 / 3 for the three saved channels; hold the selected combination until the pairing indicator flashes rapidly, then choose the keyboard in your device Bluetooth settings. A short press switches to a saved channel.
System / modifier mode
Fn + Q = Android; Fn + W = Windows; Fn + E = Mac. The supplied shortcut chart does not list a separate iOS mode.
Lights, knob and display
Fn + \| changes the main lighting effect; Fn + Tab changes its color; Fn + Up/Down changes brightness; Fn + Left/Right changes effect speed. Hold the knob/mode button to switch between lighting and office modes. Lighting mode: turn for brightness and press to cycle effects. Office mode: turn for volume and press to mute.
Software and installation
For optional customization, choose the package that explicitly matches your model. Start with USB data mode. Shared hardware does not establish that separately named firmware packages are interchangeable.
Hold Fn + Esc for 3 seconds to restore defaults. The manual says saved Bluetooth devices are retained.
F75 and F75 Pro share the same hardware configuration and use the same manual for this store's confirmed sales configuration. F75 has top-facing letter legends; F75 Pro has side-facing letter legends.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Mechanical
F75 Pro
SKU: A10030
Keys
80 keys
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
322.7 × 143.2 × 43.1 mm (±1 mm)
Battery
4000mAh
Use the matching F75 Pro driver for customization; select the software package for your model.
Selected product image; colors and configurations vary.View product
Appearance and layout
Same compact layout, 80 keys and control knob as F75, with side-facing letter legends.
USB wired
Connect a USB data cable to the keyboard and computer, then select the center USB/wired position on the mode switch. The center position turns battery power off when the USB cable is disconnected.
2.4GHz receiver
Select 2.4GHz mode and plug in the included receiver; it is factory-paired. If reconnection fails, remove the receiver, hold Fn + `~ for about 3 seconds until the indicator flashes rapidly, then insert the receiver again.
Bluetooth channels
Select Bluetooth mode. Use Fn + 1 / 2 / 3 for the three saved channels; hold the selected combination until the pairing indicator flashes rapidly, then choose the keyboard in your device Bluetooth settings. A short press switches to a saved channel.
System / modifier mode
Fn + Q = Android; Fn + W = Windows; Fn + E = Mac. The supplied shortcut chart does not list a separate iOS mode.
Lights, knob and display
Fn + \| changes the main lighting effect; Fn + Tab changes its color; Fn + Up/Down changes brightness; Fn + Left/Right changes effect speed. Hold the knob/mode button to switch between lighting and office modes. Lighting mode: turn for brightness and press to cycle effects. Office mode: turn for volume and press to mute.
Software and installation
For optional customization, choose the package that explicitly matches your model. Start with USB data mode. Shared hardware does not establish that separately named firmware packages are interchangeable.
Hold Fn + Esc for 3 seconds to restore defaults. The manual says saved Bluetooth devices are retained.
F75 and F75 Pro share the same hardware configuration and use the same manual for this store's confirmed sales configuration. F75 has top-facing letter legends; F75 Pro has side-facing letter legends.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Selected product image; colors and configurations vary.View product
Appearance and layout
Compact body with F-row, arrows, top-right display and knob; no separate number pad.
USB wired
Connect a USB data cable to the keyboard and computer, then select the center USB/wired position on the mode switch. The center position turns battery power off when the USB cable is disconnected.
2.4GHz receiver
Select 2.4GHz mode and plug in the included receiver; it is factory-paired. If reconnection fails, remove the receiver, hold Fn + `~ for about 3 seconds until the indicator flashes rapidly, then insert the receiver again.
Bluetooth channels
Select BT mode; hold Fn + 1 / 2 / 3 for 3 seconds until the display shows the corresponding pairing message. Pair AULA F75Max-1 / -2 / -3 in Bluetooth settings. Short-press the same combination to switch channels.
System / modifier mode
Select Windows, Mac/iOS or Android from the screen system menu.
Lights, knob and display
Fn + \| changes the main lighting effect; Fn + Tab changes its color; Fn + Up/Down changes brightness; Fn + Left/Right changes effect speed. Use the screen menu for system, effect, color, language, brightness, speed and volume.
Software and installation
Basic use needs the selected keyboard connection. The manufacturer download index lists F75MAX software, but the supplied manual does not establish software OS support, connection limits or custom-image features. Match the exact hardware edition before installing.
Fn + Esc restores defaults. Reset duration and Bluetooth-pairing retention are not stated in this supplied sheet.
AulaTechStore confirms 80 keys plus one control knob for the current sales configuration (81 when the knob is included in the count). This count is owner-confirmed; it is not stated in the supplied English specification block. Display size and custom-image support are not stated.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Mechanical
AU75
SKU: A10086
Keys
81 keys
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
336.34 × 147.30 × 44.31 mm (±1 mm)
Battery
4000mAh
Check switch and color choices for the selected configuration.
Selected product image; colors and configurations vary.View product
Appearance and layout
F-row and arrows, separate switch next to a large top-right knob, plus an RGB light bar.
USB wired
Connect a USB data cable to the keyboard and computer, then select the center USB/wired position on the mode switch. The center position turns battery power off when the USB cable is disconnected.
2.4GHz receiver
Select 2.4GHz mode and plug in the included receiver; it is factory-paired. If reconnection fails, remove the receiver, hold Fn + `~ for about 3 seconds until the indicator flashes rapidly, then insert the receiver again.
Bluetooth channels
Select Bluetooth mode. Use Fn + 1 / 2 / 3 for the three saved channels; hold the selected combination until the pairing indicator flashes rapidly, then choose the keyboard in your device Bluetooth settings. A short press switches to a saved channel.
System / modifier mode
Fn + Q = Android; Fn + W = Windows; Fn + E = Mac. Match the physical mode switch before pairing.
Lights, knob and display
Fn + \| changes the main lighting effect; Fn + Tab changes its color; Fn + Up/Down changes brightness; Fn + Left/Right changes effect speed. Hold the knob/mode button to switch between lighting and office modes. Lighting mode: turn for brightness and press to cycle effects. Office mode: turn for volume and press to mute.
Software and installation
Basic typing uses the selected USB, receiver or Bluetooth connection. Matching software is optional for the customization described in the manual. Start with USB data mode and choose the exact model and hardware edition from the manufacturer support page; software operating-system support is not specified in this supplied manual.
Fn + Esc restores default lighting. Previously saved Bluetooth devices are retained.
The software features shown in the supplied product images do not establish native Mac software support.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Mechanical
A75 Alice
SKU: A10083
Keys
83 keys
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
366.1 × 154.6 × 51 mm (±1 mm)
Battery
4000mAh
Check switch and color choices for the selected configuration.
Selected product image; colors and configurations vary.View product
Appearance and layout
Angled left/right key groups, split spacebars, joystick and top-right knob; magnetic height-adjustable feet.
USB wired
Connect a USB data cable to the keyboard and computer, then select the center USB/wired position on the mode switch. The center position turns battery power off when the USB cable is disconnected.
2.4GHz receiver
Select 2.4GHz mode and plug in the included receiver; it is factory-paired. If reconnection fails, remove the receiver, hold Fn + `~ for about 3 seconds until the indicator flashes rapidly, then insert the receiver again.
Bluetooth channels
Select BT mode; hold Fn + 1 / 2 / 3 for 3 seconds to pair a channel, then choose A75 in device Bluetooth settings. Short-press the channel combination to reconnect.
System / modifier mode
Use the dedicated Windows/Mac switch. Mac mode swaps the left Win and Alt positions and changes F-row behavior.
Lights, knob and display
Fn + \| changes the main lighting effect; Fn + Tab changes its color; Fn + Up/Down changes brightness; Fn + Left/Right changes effect speed. Hold the knob/mode button to switch between lighting and office modes. Lighting mode: turn for brightness and press to cycle effects. Office mode: turn for volume and press to mute.
Software and installation
Optional model-matched software supports remapping, macros and layered functions in wired and 2.4GHz modes. Native software OS support is not stated. Use USB mode for firmware updates only when an exact-version update is required.
Fn + Esc restores factory default lighting; pairing-data behavior is not stated.
The joystick provides arrow directions and a center Enter function. Mounting structure differs between the supplied language versions; confirm the actual sales edition if this matters to you.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Mechanical
Hi75C Pro
SKU: A10018
Keys
81 Keys
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
329.5 × 136 × 44.3 mm (±0.2 mm; supplemental full manual)
Battery
4000mAh
Bluetooth pairing shortcuts: Fn + E / R / T for channels 1 / 2 / 3. Follow the operation card supplied with the keyboard.
Selected product image; colors and configurations vary.View product
Appearance and layout
Compact F-row and arrow layout with a top-right knob. Supplemental full manual describes aluminum upper and lower covers.
USB wired
Connect USB to the keyboard and computer, then select wired mode.
2.4GHz receiver
Select 2.4GHz mode. If pairing is needed, hold Fn + `~ for 3 seconds, then insert the receiver when the indicator flashes rapidly.
Bluetooth channels
The supplied Hi75C PRO manual uses Fn + E / R / T for Bluetooth channels 1 / 2 / 3. Select Bluetooth mode and follow the pairing indicators shown in the supplied manual.
System / modifier mode
Use the system-mode key legends on your keyboard. A complete OS shortcut mapping is not specified in the supplied Hi75C PRO manual.
Lights, knob and display
Hold the knob/mode button to switch between lighting and office modes. Lighting mode: turn for brightness and press to cycle effects. Office mode: turn for volume and press to mute.
Software and installation
The full manual describes optional customization through wired and 2.4GHz connections; the product documentation limits the desktop software to Windows. Confirm exact hardware/firmware version before installing.
A reset shortcut is not specified in the supplied Hi75C PRO manual.
Bluetooth instructions follow the supplied Hi75C PRO manual: Fn + E / R / T for channels 1 / 2 / 3.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Mechanical
F98
SKU: A10034
Keys
99 Keys
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
384.98 × 138.20 × 40.68 mm (±0.5 mm)
Battery
2 × 2000mAh (4000mAh combined)
Check switch and color choices for the selected configuration.
Selected product image; colors and configurations vary.View product
Appearance and layout
Closely spaced number pad and arrows, transparent-style keycaps and side lighting; no knob shown.
USB wired
Connect a USB data cable and select Fn + 4 for wired mode.
2.4GHz receiver
Short-press Fn + `~ for 2.4GHz mode. For re-pairing, hold that combination until the cyan indicator flashes quickly, then insert the factory-paired receiver.
Bluetooth channels
Hold Fn + 1 / 2 / 3 for 5 seconds to pair the corresponding channel (BLE5.1 KB-1 / -2 / -3). Use the matching channel to reconnect.
System / modifier mode
Fn + Q = Android; Fn + W = Windows; Fn + E = Mac; Fn + R = iOS. Choose the matching mode for the correct modifier and F-row behavior.
Lights, knob and display
Fn + \| changes the main lighting effect; Fn + Tab changes its color; Fn + Up/Down changes brightness; Fn + Left/Right changes effect speed. Fn + Right Shift / Right Alt / Right Ctrl controls side-light mode / brightness / speed.
Software and installation
Basic typing uses the selected USB, receiver or Bluetooth connection. Matching software is optional for the customization described in the manual. Start with USB data mode and choose the exact model and hardware edition from the manufacturer support page; software operating-system support is not specified in this supplied manual.
Hold Fn + Esc for 3 seconds to restore defaults. The manual says saved Bluetooth devices are retained.
The supplied manual says 99 keys. Transparent keycaps describe the illustrated/manual edition, not every colorway.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Mechanical
F99
SKU: A10050
Keys
99 Keys
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
390.63 × 146.78 × 42.57 mm (±0.5 mm)
Battery
2 × 4000mAh (8000mAh combined)
Check switch and color choices for the selected configuration.
Selected product image; colors and configurations vary.View product
Appearance and layout
Compact number-pad layout with side light bars; no knob or screen shown.
USB wired
Connect a USB data cable to the keyboard and computer, then select the center USB/wired position on the mode switch. The center position turns battery power off when the USB cable is disconnected.
2.4GHz receiver
Select 2.4GHz mode and plug in the included receiver; it is factory-paired. If reconnection fails, remove the receiver, hold Fn + `~ for about 3 seconds until the indicator flashes rapidly, then insert the receiver again.
Bluetooth channels
Select Bluetooth mode. Use Fn + 1 / 2 / 3 for the three saved channels; hold the selected combination until the pairing indicator flashes rapidly, then choose the keyboard in your device Bluetooth settings. A short press switches to a saved channel.
System / modifier mode
Fn + Q = Android; Fn + W = Windows; Fn + E = Mac; Fn + R = iOS. Choose the matching mode for the correct modifier and F-row behavior.
Lights, knob and display
Fn + \| changes the main lighting effect; Fn + Tab changes its color; Fn + Up/Down changes brightness; Fn + Left/Right changes effect speed. Fn + B shows battery status through the RGB ambient light bar when not connected to USB.
Software and installation
Basic typing uses the selected USB, receiver or Bluetooth connection. Matching software is optional for the customization described in the manual. Start with USB data mode and choose the exact model and hardware edition from the manufacturer support page; software operating-system support is not specified in this supplied manual.
Hold Fn + Esc for 3 seconds to restore defaults. The manual says saved Bluetooth devices are retained.
Software customization is described; its supported OS and connection modes are not specified in this supplied sheet.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Mechanical
F99 Pro
SKU: A10049
Keys
99 Keys + 1 Multifunction Knob
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
406.76 × 139.31 × 43.28 mm (±0.1 mm)
Battery
8000mAh (2 × 4000mAh)
Switch selection depends on the configuration: Gradient Black / Nimbus; Comic Color / Gray Wood V3; White Comics / Seiya.
Selected product image; colors and configurations vary.View product
Appearance and layout
Number-pad layout with a large top-right knob and ambient light bar; no display shown.
USB wired
Connect a USB data cable to the keyboard and computer, then select the center USB/wired position on the mode switch. The center position turns battery power off when the USB cable is disconnected.
2.4GHz receiver
Select 2.4GHz mode and plug in the included receiver; it is factory-paired. If reconnection fails, remove the receiver, hold Fn + `~ for about 3 seconds until the indicator flashes rapidly, then insert the receiver again.
Bluetooth channels
Select BT mode. Hold Fn + 1 / 2 / 3 for 3 seconds until the blue indicator flashes quickly; pair the matching AULA-F99Pro channel. Short-press to switch saved channels.
System / modifier mode
Fn + Q = Android; Fn + W = Windows; Fn + E = Mac; Fn + R = iOS. Choose the matching mode for the correct modifier and F-row behavior.
Lights, knob and display
Fn + \| changes the main lighting effect; Fn + Tab changes its color; Fn + Up/Down changes brightness; Fn + Left/Right changes effect speed. Hold the knob/mode button to switch between lighting and office modes. Lighting mode: turn for brightness and press to cycle effects. Office mode: turn for volume and press to mute.
Software and installation
Basic typing uses the selected USB, receiver or Bluetooth connection. Matching software is optional for the customization described in the manual. Start with USB data mode and choose the exact model and hardware edition from the manufacturer support page; software operating-system support is not specified in this supplied manual.
Fn + Esc restores factory default lighting; the manual says previously connected Bluetooth devices are retained. The reset hold duration is not stated.
Weight bases differ across manuals, so weight is not used to rank models.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Mechanical
F106 Pro
SKU: A10010
Keys
104 keys
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
445.17 × 142.94 × 43.46 mm (±0.1 mm)
Battery
8000mAh
Check switch and color choices for the selected configuration.
Selected product image; colors and configurations vary.View product
Appearance and layout
Separate number pad and navigation cluster, top-right screen and knob.
USB wired
Turn battery power off for USB operation where the manual specifies it. In the screen menu, choose Connection Method → USB/wired, then connect a USB data cable. The screen indicates successful connection.
2.4GHz receiver
Turn wireless power on. Choose Connection Method → 2.4GHz on the screen. The receiver is factory-paired. To re-pair, hold the knob for 5 seconds until the screen shows pairing, then insert the receiver.
Bluetooth channels
Turn wireless power on. Choose Connection Method → BT1, BT2 or BT3 on the screen. Hold the knob for 5 seconds to enter pairing, then select the matching keyboard/channel in device Bluetooth settings. Select a saved screen channel to switch devices.
System / modifier mode
Choose Windows / Mac / iOS / Android in the screen System menu.
Lights, knob and display
Use the screen menu for effects, color, brightness, speed and volume. Rotate the knob to select/adjust and press it to confirm. Use the knob for menu control; touch controls are not documented.
Software and installation
Optional matching software is described for display customization and time/calendar synchronization. Software OS support and connection limits are not stated; use USB data mode and check the exact download.
Fn + Esc restores defaults; reset duration and Bluetooth retention are not stated.
The manual says 104 keys, despite the F106 name. A clock/calendar may need software synchronization after battery power is switched off.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Mechanical
F108 Pro
SKU: A10013
Keys
104 keys
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
445.17 × 141.47 × 42.93 mm (±0.1 mm)
Battery
4000mAh + 4000mAh (8000mAh combined)
Use the matching F108 Pro driver for LCD customization and music-reactive RGB lighting.
Selected product image; colors and configurations vary.View product
Appearance and layout
Full-width keyboard with number pad, navigation cluster, top-right screen and knob.
USB wired
Turn battery power off for USB operation where the manual specifies it. In the screen menu, choose Connection Method → USB/wired, then connect a USB data cable. The screen indicates successful connection.
2.4GHz receiver
Turn wireless power on. Choose Connection Method → 2.4GHz on the screen. The receiver is factory-paired. To re-pair, hold the knob for 5 seconds until the screen shows pairing, then insert the receiver.
Bluetooth channels
Set the switch to ON; select Connection Method → Bluetooth and BT1/BT2/BT3. Hold the knob for 5 seconds to pair, then select AULA F108pro-1 / -2 / -3.
System / modifier mode
The specification table lists Windows and Android. The manual also provides Mac OS function-key mappings. It does not give a complete operating-system-by-connection compatibility matrix; iOS support is not specified in the reviewed manual sections.
Lights, knob and display
Use the screen menu for effects, color, brightness, speed and volume. Rotate the knob to select/adjust and press it to confirm. Use the knob for menu control; touch controls are not documented. Fn + press knob toggles between screen and volume controls.
Software and installation
Use optional software only for the exact F108 Pro edition. The reviewed English manual does not specify customization-software operating-system or connection requirements. F108 Pro V2 support on AULA HUB must not be extended to this Pro automatically.
Fn + Esc is labeled factory reset; duration and retention are not stated.
F108 Pro and F108 Pro V2 are separately named editions. Choose the software and instructions that match your keyboard.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Mechanical
Nova75
SKU: A10087
Keys
80 Keys
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
319.05 × 140.67 × 44.7 mm (±1 mm)
Battery
8000mAh
8000mAh for the current sales configuration. Battery capacity alone does not establish runtime.
Selected product image; colors and configurations vary.View product
Appearance and layout
Compact number-pad-free layout with right-side TFT screen, knob and ambient lighting.
USB wired
Connect a USB data cable to the keyboard and computer, then select the center USB/wired position on the mode switch. The center position turns battery power off when the USB cable is disconnected.
2.4GHz receiver
Select 2.4GHz mode and plug in the included receiver; it is factory-paired. If reconnection fails, remove the receiver, hold Fn + `~ for about 3 seconds until the indicator flashes rapidly, then insert the receiver again.
Bluetooth channels
Select BT on the left mode switch. Hold Fn + 1 / 2 / 3 to pair the corresponding AULA-NOVA75-1 / -2 / -3 channel; follow the pairing/connected message on the screen.
System / modifier mode
The manual provides Windows, Mac, Android and iOS F-row behavior. Select the matching screen/system mode; a direct system-mode shortcut is not specified.
Lights, knob and display
Fn + \| changes the main lighting effect; Fn + Tab changes its color; Fn + Up/Down changes brightness; Fn + Left/Right changes effect speed. Hold Fn + scroll wheel to switch knob function. Fn + Backspace toggles the screen; Fn + M toggles ambient lighting.
Software and installation
For optional TFT customization, use the official NOVA75 ALT FN driver v1.0.0.1 and start with USB data mode. Driver software and firmware are separate resources; choose the package matching your keyboard's hardware edition and confirm the exact revision before flashing firmware.
NOVA75 ALT FN firmware V2.11 (8000mAh) — NOVA75 ALT FN firmware V2.11; the official file is labelled 8000mAh. Choose the package matching your keyboard's hardware edition and confirm the exact revision with AULA before flashing.
Reset and its effects
Hold Fn + Esc for 3 seconds to restore defaults. The manual says saved Bluetooth devices are retained.
The official NOVA75 manual lists 4000mAh × 2 (8000mAh total), matching this store's confirmed sales capacity. Capacity alone does not establish runtime. Read official NOVA75 manual (PDF)
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Mechanical
S98 Pro
SKU: A10022
Keys
96 Keys
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
406.6 × 137.9 × 45.1 mm (±0.2 mm)
Battery
5000mAh
Check switch and color choices for the selected configuration.
Selected product image; colors and configurations vary.View product
Appearance and layout
Dense number-pad layout with top-right LCD and knob.
USB wired
Turn battery power off for USB operation where the manual specifies it. In the screen menu, choose Connection Method → USB/wired, then connect a USB data cable. The screen indicates successful connection.
2.4GHz receiver
Turn wireless power on. Choose Connection Method → 2.4GHz on the screen. The receiver is factory-paired. To re-pair, hold the knob for 5 seconds until the screen shows pairing, then insert the receiver.
Bluetooth channels
Turn wireless power on. Choose Connection Method → BT1, BT2 or BT3 on the screen. Hold the knob for 5 seconds to enter pairing, then select the matching keyboard/channel in device Bluetooth settings. Select a saved screen channel to switch devices.
System / modifier mode
Choose Windows / Mac / iOS / Android in the screen System Switching menu.
Lights, knob and display
Use the screen menu for effects, color, brightness, speed and volume. Rotate the knob to select/adjust and press it to confirm. Use the knob for menu control; touch controls are not documented. The manual lists custom GIF and time/calendar functions through software.
Software and installation
Optional S98 Pro software requires Windows and USB wired mode, explicitly stated in the supplied manual. It supports key combinations, macros, RGB, clock/calendar and custom GIF settings.
Hold Fn + Esc for 3 seconds; Bluetooth retention is not specified.
The manual says 96 keys. Hot-swap support for the current sales configuration is confirmed by AulaTechStore. Socket pin compatibility is not specified in the supplied sheet; confirm replacement-switch compatibility before installation.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Magnetic HE
HERO 68 HE
SKU: A10068
Keys
68 keys
Connections
USB-C wired
Dimensions
313.70 × 119.86 × 40.35 mm excluding side panels; 322.40 × 119.86 × 40.35 mm including side panels (±0.1 mm)
Battery
No battery specified; wired model
Manufacturer-stated Rapid Trigger adjustment accuracy: 0.01 mm. This is not a verified minimum Rapid Trigger distance.
Selected product image; colors and configurations vary.View product
Appearance and layout
Compact layout with arrows, no dedicated F-row or number pad; top ambient-light box and side panels/ribbons.
USB wired
Connect USB-C to the computer with a data cable. This manual describes a wired keyboard and does not document Bluetooth or receiver setup.
2.4GHz receiver
Not applicable: no 2.4GHz mode documented.
Bluetooth channels
Not applicable: no Bluetooth mode documented.
System / modifier mode
Hold Fn + A for 5 seconds for Windows; hold Fn + S for 5 seconds for Mac. Mac mode swaps left Win and Alt.
Lights, knob and display
Fn + PgUp cycles main lighting; Fn + Home toggles it; Fn + Up/Down changes brightness. Fn + Right Alt / X / C / Z changes ambient-box mode / color / brightness / speed.
Software and installation
Use the matching official web configurator for actuation, RT, DKS and other magnetic-key settings. Use USB data mode. During calibration, start the calibration in software, press each key until it lights green, then save. The manual lists 0.1–3.4 mm actuation range and 0.01 mm RT adjustment precision; these are manufacturer claims.
Hold Fn + Space for 5 seconds to restore keyboard defaults.
Fn + 1 through = provides F1–F12. Hold Fn + Right Ctrl for FN2 and use its secondary shortcuts. The official HUB page currently lists HERO 68 HE; verify your exact edition. SOCD/multi-action features should only be used where the game rules allow.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Magnetic HE
HERO 75 HE
SKU: A10074
Keys
84 keys
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
313.0 × 138.95 × 42.51 mm (±0.1 mm; without side panels); 322.05 × 138.95 × 42.51 mm (±0.1 mm; with side panels)
Battery
8000mAh (built-in)
0.005 mm is the manufacturer-stated adjustment accuracy, not a verified minimum Rapid Trigger distance.
Selected product image; colors and configurations vary.View product
Appearance and layout
Compact 84-key layout with F-row, arrow keys and RGB ambient light box; no separate number pad or knob.
USB wired
Connect a USB-C data cable to the keyboard and computer and use the matching wired setting on your unit. The supplied manual documents USB-C wired input.
2.4GHz receiver
Set the left switch to its lower 2.4G position. The included receiver is factory-paired. To re-pair, hold Fn + Q for 3 seconds until the cyan Q indicator flashes rapidly, then insert the receiver.
Bluetooth channels
Set the left switch to its upper BT position. Fn + E / R / T selects BT1 / BT2 / BT3. Hold the chosen combination until its blue indicator flashes rapidly, then pair AULA HERO 75 HE-1 / -2 / -3 in your device Bluetooth settings. A short press reconnects.
System / modifier mode
Fn + A selects Windows; Fn + S selects Mac. The Mac mode swaps the left Win and Alt positions. These settings are also available in the driver.
Lights, knob and display
Fn + Up/Down adjusts brightness; Fn + Left/Right adjusts effect speed; Fn + Backspace toggles the main light; Fn + Tab changes color; Fn + \ changes the effect. For the ambient light box, Fn + Right Shift changes mode, Fn + Right Ctrl changes speed, Fn + /? changes color and Fn + Right Alt changes brightness.
Software and installation
Use the exact HERO 75 HE configurator for magnetic actuation, Rapid Trigger and calibration. The manual describes a 0.1–3.4 mm actuation range. During calibration, press each key until it lights green, then exit calibration. The supplied manual does not establish a complete app operating-system/connection matrix.
Hold Fn + Esc for 5 seconds to restore factory settings. The supplied manual does not state whether Bluetooth pairings are retained.
The built-in 8000mAh battery is confirmed by AulaTechStore for this sales configuration; capacity is not listed in the supplied manual. Use compatible magnetic switches and recalibrate after changing them.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Membrane
K99
SKU: A10076
Keys
98 keys
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
392.7 × 144.50 × 35.3 mm (±1 mm)
Battery
2000mAh
Numeric model specifications follow the referenced manual for this sales configuration. Switch and color choices must be checked for the selected SKU; unsupported values are not inferred.
Selected product image; colors and configurations vary.View product
Appearance and layout
Number pad, raised keys, two-stage feet and hidden receiver storage; no screen or knob.
USB wired
Plug in the USB data cable; the keyboard enters wired mode and charges.
2.4GHz receiver
Turn the switch ON with USB disconnected. For re-pairing, hold Fn + 3 for 3 seconds until the charging/pairing indicator flashes rapidly, then insert the receiver. The receiver is paired at the factory.
Bluetooth channels
Hold Fn + 1 for 3 seconds for BT1, or Fn + 2 for 3 seconds for BT2; pair in device Bluetooth settings. Fn + 3 belongs to 2.4GHz, not a third Bluetooth channel.
System / modifier mode
Fn + S = Windows; Fn + A = Mac. The specification list also names Android/iOS; shortcuts and software support may differ.
Lights, knob and display
Fn + Enter cycles lighting effects; Fn + \| changes color; Fn + Backspace toggles the lights.
Software and installation
No customization software is specified in this manual. Basic USB/receiver/Bluetooth setup does not require installing a separate customization app.
Fn + Esc restores the factory default mode after the indicator blinks four times. Bluetooth retention is not stated.
The manual identifies 98 keys and a membrane structure. Removable keycaps are not evidence of mechanical switch hot-swap or universal keycap compatibility. Read K99 manual (PDF)
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Membrane
S99
SKU: A10043
Keys
99 keys
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
412.39 × 158.02 × 51.69 mm (±0.2 mm)
Battery
2000mAh
Numeric model specifications follow the referenced manual for this sales configuration. Switch and color choices must be checked for the selected SKU; unsupported values are not inferred.
Selected product image; colors and configurations vary.View product
Appearance and layout
Number pad, three top-right M1–M3 buttons and a knob; no display shown.
USB wired
Connect a USB data cable and use Fn + 4 for wired mode.
2.4GHz receiver
Use Fn + `~ for 2.4GHz mode. Short-press to reconnect; long-press to enter pairing and insert the receiver.
Bluetooth channels
Fn + 1 / 2 / 3 selects BT1 / BT2 / BT3; short-press switches/reconnects and long-press pairs. The Caps indicator uses red / green / orange for the three channels.
System / modifier mode
Fn + Q = Android; Fn + W = Windows; Fn + E = Mac; Fn + R = iOS. Choose the matching mode for the correct modifier and F-row behavior.
Lights, knob and display
Hold the knob to switch game/office modes. Office mode uses M1/M2/M3 for previous/play-pause/next and the knob for volume/mute. Gaming mode supports hardware recording.
Software and installation
Software customization is described. In 2.4GHz mode, the manual limits customization to playback of recorded actions; recording is not supported there. Use wired mode when recording and check the exact driver OS requirements.
Hold Fn + Esc for 3 seconds to restore factory settings and clear recorded content.
For a hardware macro: Fn + Ins enters recording, press M1/M2/M3, enter the sequence, then Fn + Ins saves. Use in game mode.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Membrane
S99 Pro
SKU: A10052
Keys
99 keys
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
412.39 × 158.02 × 51.69 mm (±0.2 mm)
Battery
2000mAh
Numeric model specifications follow the referenced manual for this sales configuration. Switch and color choices must be checked for the selected SKU; unsupported values are not inferred.
Selected product image; colors and configurations vary.View product
Appearance and layout
Number pad, top-right status display and knob; raised rounded keycaps in supplied photos.
USB wired
Connect a USB data cable. The battery switch controls wireless power; select wired/USB as shown in the matching screen menu.
2.4GHz receiver
Short-press Fn + `~ to enter 2.4GHz; long-press it to pair, then insert the receiver when the screen icon flashes quickly.
Bluetooth channels
Fn + 1 / 2 / 3 selects the three Bluetooth channels; short-press switches, long-press pairs. The display knob can also select a channel and enter pairing with a long press.
System / modifier mode
Fn + Q = Android; Fn + W = Windows; Fn + E = Mac; Fn + R = iOS. Choose the matching mode for the correct modifier and F-row behavior.
Lights, knob and display
Use the display knob to select connection, brightness, volume or battery information. Press to confirm, turn to adjust, and long-press to exit.
Software and installation
The supplied manual mentions driver music-rhythm lighting but does not state a driver OS/mode matrix. Existing catalog copy says USB is required for customization; this is catalog guidance, not newly verified software behavior. Start with USB and check the exact model package.
Hold Fn + Esc for 3 seconds to restore factory settings and clear recorded content. Pairing retention is not specified.
The display shows status information. Custom GIF and photo support is not documented for this model.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Membrane
S99 Pro V2
SKU: A10096
Keys
99 keys
Connections
USB-C wired / 2.4GHz / Bluetooth
Dimensions
405.2 × 135.5 × 41.4 mm (±1 mm)
Battery
4000mAh
Numeric model specifications follow the referenced manual for this sales configuration. Switch and color choices must be checked for the selected SKU; unsupported values are not inferred.
Fn + Esc restores defaults and clears paired Bluetooth devices; the indicator flashes for 3 seconds.
The manual documents 19-key anti-ghosting for a defined key group, not full NKRO. This edition has a 4000mAh battery and two saved Bluetooth channels. Read S99 Pro V2 manual (PDF)
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Membrane
T102 Keyboard & Mouse Combo
SKU: A10039
Keys
104
Connections
USB wired
Dimensions
445 × 188.75 × 39.96 mm (±0.2 mm; keyboard)
Battery
USB powered; no battery
Numeric model specifications follow the referenced manual for this sales configuration. Switch and color choices must be checked for the selected SKU; unsupported values are not inferred.
Selected product image; colors and configurations vary.View product
Appearance and layout
Full-size keyboard, number pad, top phone/pen slot and bundled six-button wired mouse.
USB wired
Connect the keyboard and mouse USB plugs to compatible computer USB ports. They receive power through USB.
2.4GHz receiver
Not applicable: this is a wired combo.
Bluetooth channels
Not applicable: this is a wired combo.
System / modifier mode
The manual lists Windows XP / 7 / 8 / 10; Mac and other system support are not established here.
Lights, knob and display
Fn + 1 cycles constant/breathing/heartbeat backlighting. Fn + PgUp/PgDn adjusts brightness/effect frequency as labeled in the table; the detailed mode-specific behavior is not specified. Fn + Win locks/unlocks Win.
Software and installation
Basic use requires USB connection. The manual mentions an optional driver for custom functions but gives no download or verified OS matrix; use only an exact T102 package if you need customization.
No factory-reset shortcut is documented in the supplied sheet.
Keyboard supports anti-ghosting for 26 specified keys, not full NKRO. Mouse DPI settings: 1200 / 2400 / 4800 / 7200. Mouse polling rate is not the keyboard polling rate.
Setup instructions for this configuration are awaiting verification. Check the full model and hardware edition before following a manual.Manuals & Software · Ask for help
Start with the connection, then the controls.
USB wired
Use a USB data cable, then select USB/wired mode if your keyboard has a mode switch or screen menu. Some keyboards charge whenever the cable is connected; charging alone does not prove that USB data mode is selected.
2.4GHz receiver
Use the receiver supplied with that keyboard and select 2.4GHz mode. Factory pairing normally avoids a new pairing step. Re-pair only when reconnection fails, using the exact model instructions below. A receiver is not a Bluetooth adapter.
Bluetooth
Select BT mode, select a saved channel and hold its model-specific shortcut or knob to start pairing. Add the keyboard in your computer/tablet Bluetooth settings. Short presses normally reconnect or switch channels. Channel counts differ.
Follow your model’s shortcuts. K99 and S99 Pro V2 have two Bluetooth channels; HERO 75 HE uses Fn + E / R / T, while HERO 68 HE is wired.
Install only what your model needs.
Start with basic typing.
Use the correct connection and system mode, then test typing. Customization software is for optional functions such as macros, remapping, screen content and magnetic actuation.
Match the exact software edition.
Choose the full model name, including Pro, Max, V2 or HE. S98 Pro explicitly requires Windows and USB wired mode for customization. Mac typing support does not automatically establish a Mac customization app.